Blog posts

• February 17, 2023 Planning Your Electrical Panel Upgrade: What to Consider
  

  Introduction

  Electrical panel upgrades are a great way to improve your home and it's electrical system. They can also be frightening, if you don't know what you're doing. However, with the right planning, you can make sure your electrical panel upgrade is a success! Here are some tips for making sure your next electrical panel upgrade goes smoothly:

  Identify the Purpose of Your Electrical Panel Upgrade

  When you are planning your electrical panel upgrade, it's important to identify the purpose of your new electrical panel. A lot of homeowners choose to upgrade their home's electrical system because they want to improve the safety, efficiency, look and feel of their home.

  Here are some common reasons people choose to upgrade their electrical system:-

  • Improve Safety - Upgrading a home's wiring can help prevent fires from starting in the walls or ceiling when there is an overload on demand for power by appliances. This can also make it easier for firefighters if there ever was an emergency situation at your house because they will know exactly where all the wires run so they don't trip over them while trying to save lives!
  • Improve Comfort - Having newer technology means that you'll have better air conditioning units than before which mean less humidity build up during hot summer months! Also having more lights installed throughout different rooms makes it easier for everyone else who may live here too because now everyone has their own light source instead just one small lamp above each bedside table like before...

  Know What Electrical Load to Expect

  Before you can choose the right electrical panel upgrade for your home, you need to know what the electrical load is. The electrical load is the amount of power that your home draws from its electrical system. It's measured in kilowatts (kW).

  For example, if your family of four uses a lot of devices at once and they all draw 1 kW on average--which means they're each using 1,000 watts--your total household usage would be 4 kilowatts (4 kW).

  Choose the Right Type of Electrical Panel Upgrade

  When planning your electrical panel upgrade, you need to consider the following:

  • Choose a panel that has enough capacity for your needs. If you already have many circuits installed in your home and want to add more, it's important that you choose an upgraded system with an appropriately sized breaker box.
  • Choose a panel that matches the electrical system in your home and neighborhood. The National Electrical Code (NEC) requires all new homes built after January 1st 2008 to include ground fault circuit interrupters (GFCIs) on outlets near sinks and baths so they're accessible by children who may be crawling through wet areas. This requirement also applies to older homes if they are being remodeled or renovated so they comply with current codes related to safety standards such as fire protection systems or emergency lighting requirements

  Plan for Future Growth or Expansion

  When planning for future growth or expansion, it's important to consider the following:

  • How much space will your electrical panel need?
  • How many circuits do you need in each room? If you have an older home with only one circuit per room, adding more circuits may be necessary. If this is the case, a larger capacity panel can help accommodate the extra load. On the other hand, if you have newer homes with multiple outlets per room and don't anticipate any major changes in usage patterns, then upgrading to a larger capacity panel might not be necessary--though it's always better safe than sorry!

  Electrical panel upgrades are a great way to improve your home and it's electrical system.

  Electrical panel upgrades are a great way to improve your home and it's electrical system.

  Electrical panel upgrades can help you avoid electrical fires by making sure that your current wiring is up to code, and by upgrading the hardware in your breaker box. They also allow you to connect more devices without overloading circuits or causing shorts in other parts of the house that may cause damage or injury. Additionally, an upgraded circuit breaker will be able to handle higher wattage loads than a standard breaker would handle otherwise, which can save money on electric bills by reducing the amount of energy wasted through overloading circuits as well as allowing homeowners who want more power (such as those with high-tech appliances) greater flexibility when choosing which outlets they want installed throughout their homes. Finally, having upgraded breakers means there will be less chance for fire hazards later down road after several years have passed since installation; so long-term benefits include less risk for potential fires due to age related issues such as corrosion due lack maintenance over time."

  Conclusion­­­­­

  The benefits of an electrical panel upgrade are many. It can improve the safety and efficiency of your home, while also helping you save money on energy costs over time. If you're considering an electrical panel upgrade for your home or business, we hope this article has given you some insight into what steps need to be taken before making that investment.

   

• February 16, 2023 How an Electrical Panel Upgrade Can Benefit Your Home's Safety and Efficiency
  

  Introduction

  If you're like most homeowners, you probably don't give your home's electrical panel much thought. It's usually just a small box that sits on the outside of the house, right? Well, it turns out that electrical panels are more important than you think! That's why I'm here to tell you about why it's so important to have a properly functioning electrical panel. In this post we'll talk about what an electrical panel upgrade entails, how often your panel should be inspected by a professional electrician and other things that can affect its functionality (like overloading), and lastly we will discuss some of the benefits of upgrading your existing one if it is becoming outdated.

  The Purpose of an Electrical Panel Upgrade

  The purpose of an electrical panel upgrade is to improve the safety and efficiency of your home's electrical system. An electrical panel upgrade can help you avoid a power outage, prevent fires, save money on energy bills and keep your family safe.

  A functioning electrical system is essential for every home because it powers everything from lights to appliances. When there are problems with this system, such as short circuits or broken wires (which can cause fires), it can be difficult to fix them without hiring an electrician or other professional who has experience fixing electricity issues in homes like yours. By upgrading your existing wiring system with new parts that are designed specifically for this purpose, however--such as new breakers--you'll be able to fix any issues quickly without having to worry about costly repairs later down the line!

  Inspect Your Panel Regularly

  • Inspect your panel regularly.
  • Check for signs of corrosion and wear, loose wires, breakers that are not working properly and signs of overheating.
  • Look for missing or broken covers on the panels as well, which could allow moisture to get inside and damage the circuit breakers or wiring connections inside.

  Why You Need a New Overload Protection Device

  If you're not familiar with overload protection devices, they're simple and essential components of your electrical system. An overload protection device is an electrical component that protects against damage to your home's wiring and appliances when there is an excessive current draw on the system. They work by shutting off power to the circuit when an overload occurs and then automatically resetting once it has been corrected. This prevents damage from occurring in both residential homes as well as commercial buildings like schools or hospitals where large amounts of electricity are required for everyday operations such as lighting or heating/cooling systems.

  Overload protection devices are available in several different styles depending on what type of application they will be installed into:

  The Benefits of Upgrading Your Electrical Panel

  You may be wondering what benefits you can expect to see if you upgrade your electrical panel. A new, modern panel will provide a number of benefits that work together to improve safety and efficiency in your home.

  First and foremost, upgrading an outdated system will help reduce the chances of fire or injury by ensuring that everything is up-to-date and working properly. A functional circuit breaker protects against overloads; if one trips due to excessive current flow through it (such as when too many appliances are plugged into one outlet), then all power will be cut off until such time as repairs can be made or replacement parts installed by an electrician. This prevents fires from starting due to overheating wires or overloaded circuits which would otherwise cause damage over time if left unchecked--and also keeps everyone safe from electrical shocks!

  Upgrading your electrical panel is the first step to making your home safer and more energy efficient.

  Electrical panel upgrades are the first step to making your home safer and more energy efficient. When it comes to electrical panels, there are three main things you should know:

  • The benefits of upgrading your electrical panel.
  • How to spot a problem with your electrical panel.
  • How often you should check your electrical panel for problems (and what to do if there is one).

  Conclusion

  We hope that this article has helped you understand the importance of upgrading your electrical panel. It's not something that should be taken lightly, but it is an investment worth making. There are many benefits to doing so, including increased safety and efficiency in your home. If you're ready to get started on your own upgrade project or are just curious about what a new panel would look like in your home, feel free to contact us today!

   

• February 15, 2023 Power Up Your Home: Why You Need an Electrical Panel Upgrade
  

  Introduction

  You don't often think about your electric panel, but it's a crucial part of your home's electrical system. When it comes time to upgrade, you'll want to be sure that you're getting the best possible deal on an upgrade and that you're making the right choice for your home. In this article we'll tell you everything there is to know about upgrading an electrical panel—including how they work and when they need to be replaced—so that you can make an informed decision about whether or not an upgrade is right for you and your family.

  What Does an Electrical Panel Do?

  An electrical panel is the box that distributes power to all the outlets in your home. It's usually located in the basement, garage or utility room and is made up of breakers that are sized to handle different loads. When you flip on a light switch or plug something into an outlet, electricity flows from this central location through wires to those devices.

  When you upgrade your panel, it could mean replacing old wiring with new copper wire (the most common material), or upgrading from aluminum to copper if needed. You may also decide to add more circuits so there's enough space for future additions like additional lighting fixtures or appliances like water heaters and washers/dryers.

  When Should You Upgrade?

  • When you have an older home
  • When you have a new addition
  • When you have an addition that is not connected to the main panel
  • If the electrical system is damaged (and it's not safe to work with)

  How to Make Sure You're Safe

  If you want to know if you're safe, do a quick inspection of the electrical panel. You should be able to tell if there are any issues with it by looking at the circuit breakers, wires and switches.

  • Circuit Breaker: The first thing to check is whether or not all of your circuit breakers are working properly by switching them on and off several times. If something feels off or doesn't work as intended during this test, call an electrician immediately--you may have faulty wiring that needs repair or replacement before it causes serious damage to your home and family members!
  • Wires: Next up is examining all of the wires leading into each receptacle (outlet) within your home's walls and ceilings; make sure none of these wires appear frayed or broken anywhere along their length--if so then get outta Dodge ASAP! Not only could this indicate poor quality workmanship but also potential fire hazards down road...so best avoid either scenario altogether!

  How Much Does an Electrical Panel Upgrade Cost?

  The cost of an electrical panel upgrade depends on the size and number of circuits in your home. If you do it yourself, expect to pay between $1,000 and $3,000; if you hire a professional electrician to do the work for you, plan on spending between $2,500 and $7,000.

  The Bottom Line on Upgrading Your Electrical Panel

  • Why you need to upgrade your electrical panel:
  • How much it will cost:
  • What to look for in an electrician:

  If you are not sure about the upgrade, consider these questions before proceeding with an electrical panel upgrade.

  Upgrading your electrical panel is a great way to improve your home's power.

  An upgraded electrical panel is a great way to improve your home's power. It can help protect you, your family and the value of your property.

  • Upgrading your electrical panel can increase the value of your home by up to $2,000!
  • Upgrading an outdated or damaged system will help protect everyone who lives in or visits your home from potential danger and save lives.
  • Upgrading an outdated system will also save money on energy costs because modern panels use less electricity than older models do--which means lower monthly bills for homeowners who rely on electricity for their day-to-day needs like running appliances and heating/cooling systems

  Conclusion

  We hope that you've found this article to be helpful. We know how important it is for you to have reliable electricity in your home, and we want to make sure that your power system can last for years to come. If you're considering upgrading your electrical panel, contact us today! We will be happy to answer any questions or concerns about our services and help guide you through the process.

   

• February 13, 2023 The Importance of Hiring a Professional for Your Electrical Panel Upgrade
  

  Introduction

  If you're living in an older home, there's a good chance that your electrical panel needs an upgrade. Electrical panels have come a long way since they were first introduced, and with the right upgrades, they can be safer than ever before. At the same time, it's important to keep in mind that electrical work should always be performed by experienced professionals. So if your electrical panel needs updating or repairing, don't even think about doing it yourself—call us instead!

  The Importance of Hiring a Professional for Your Electrical Panel Upgrade

  • Hiring a professional is the best way to ensure that your electrical panel upgrade will be done right.
  • Professional electricians have years of experience and training, so you can be assured that they will do the job correctly.
  • It's much cheaper to hire a professional electrician than it is for you or your family member who may not have any experience with electrical work or safety codes.
  • If an inexperienced person attempts an electrical panel upgrade on their own, they could cause serious damage or even electrocution if they don't follow all safety precautions carefully.

  Why Should You Update Your Electrical Panel?

  So, why should you update your electrical panel?

  • Safety: The main reason is safety. Older panels can be unreliable and dangerous, especially if they are outdated or have been damaged by fire or water. If there is an issue with the circuit breakers on your old panel, it could cause a fire hazard in your home. A newer, updated system will have better protection against fires and other hazards that could threaten your family's wellbeing.
  • Cost: Upgrading to a new electrical system can save you money in the long run because of how much energy efficient they are compared to older models. With newer technology comes better insulation against voltage fluctuations which means less wasted energy as well as lower bills month after month! Additionally though many homeowners may not realize this but there could potentially be tax incentives available for upgrading too

  Electrical Panel Upgrade vs Lighting Upgrade

  An electrical panel upgrade is a process in which you replace the existing wiring and components within your home's main electrical panel. A lighting upgrade involves installing new light fixtures, bulbs, and switches in select rooms or throughout the entire house. While both projects may seem similar at first glance, there are some notable differences between them that you should consider before beginning either project.

  One of the biggest benefits of hiring an electrician for an electrical panel upgrade is that they can help ensure that all wiring meets current code requirements while also providing safe operation throughout your home--something most homeowners cannot do on their own. Additionally, if there are any issues with your existing system (such as poor insulation), they will identify these problems so they don't cause further damage down the line!

  With regards to lighting upgrades: while it might seem like more work than necessary just because there aren't many differences between this process and installing new fixtures alone (which could take up significant time), upgrading lights will actually save money over time because these upgrades last longer than standard bulbs do without requiring replacement nearly as often - meaning fewer trips back into town just remember why we got started here?

  On-Site Inspections Are Essential for Any Electrical Panel Upgrades

  • On-site inspection is essential for any electrical panel upgrades.
  • Inspect the electrical panel for signs of corrosion and damage.
  • If you notice any corrosion or damage, replace your existing panel with a new one.

  Our Professional Electricians Have Experience with Every Type of Electrical Panel Upgrade.

  Our professional electricians have experience with every type of electrical panel upgrade. They can help you choose the best option for your home, whether that's a new circuit breaker box or an entirely new panel.

  Our team is well-versed in various types of upgrades and replacements, including:

  • Circuit breaker replacement/upgrades
  • Main service panel replacement/upgrades (also called distribution boards)
  • Subpanel installation & repairs

  An electrical panel upgrade is an essential repair that shouldn't be done without professional help.

  Electrical panel upgrades are not simple DIY projects. An electrical panel upgrade requires professional expertise and experience to ensure that it's done correctly, safely and to code. If you don't have the proper knowledge or training to perform this work yourself, it's best to hire a licensed electrician from your local area who has been trained on how to handle such projects.

  An improperly installed electrical system can be dangerous for both you and your family members if something goes wrong during its operation. You may also find yourself having trouble selling your home in the future because potential buyers will likely want assurances that all of its systems have been properly maintained before they purchase it from you--and having an outdated electrical system could be one thing that causes them concern (especially since many older homes still use knob-and- tube wiring).

  Conclusion

  If you're looking to upgrade your electrical panel, it's important that you hire a professional. Our team of electricians has experience with every type of electrical panel upgrade and can help you decide which one is best for your home or business. We offer free estimates and consultations so that our clients can understand all of their options before making any decisions about their project.